Truck Security Cameras Infrared night vision truck blind spot AHD side view monitoring reverse image
The input voltage of the camera is 12 - 24V
The standard contact points for aviation heads are : 1 positive pole 2 negative pole 3 air 4 video . If you need other contacts please contact customer service !
(1) Side view : In the basic graphics mode when turning on the left or right turn lights the display screen switches to the left and right display modes cancels the turn signal and the screen automatically switches to the basic graphics mode with a delay of 5 seconds to turn off the display and switch to navigation and audio mode
(2) Side and rear view : When reverse gear is engaged and turn signals are turned on the display screen switches to a three screen display mode where the lower half of the display screen displays the reverse rear view screen and the upper left corner displays the front left image of the car . The upper right corner displays the front right image of the car . On this basis exit reverse gear and when the turn signal is powered on the display screen switches to the left and right display modes The left side displays the left front screen of the car and the right side displays the right front screen of the car When the turn signal is cancelled the screen automatically switches to the basic screen mode with a delay of 15 seconds to turn off the display and automatically switch to the navigation audio mode
(3) During the operation of the car pressing the membrane switch or lifting the steering lever upwards can enter the basic screen mode
(4) When controlling the steering lever the lever can only be lifted once at a time If you need to enter the next screen you need to pause for one second before operating Continuous operation for more than two times is invalid Thin film switch is optional
(5) When using the headlights at night the steering lever control is ineffective In this case press the dual flashing lights to trigger and then turn off the dual flashing lights At this time the system enters basic mode and the operation method for switching the display screen is shown in steps (1) - (7) .
Control flowchart of 360 ° panoramic monitoring system :
Figure
(6) Control flowchart of 360 ° panoramic monitoring system
Note : When using the headlights press the dual flashing lights to trigger the main unit turn off the dual flashing lights at any time and the monitoring system enters basic mode
We are a professional manufacturer of research and development production and vehicle monitoring
Car video recorder car camera car usb camera car display usb camera
Please contact us by email : firecore1688@163.com
WeChat and phone : 0086+13823606792
Product Tags:
|
|
IP67 Truck Side View Camera 24V AHD infrared night vision security camera Images
|
